| Quick and easy size change. |
Increased production efficiency
and flexibility. |
| Automatic case squaring system. |
Consistency for automatic lines
and enhanced cosmetics. |
| Tape and case monitoring. |
Operator friendly and reliability. |
| Single frame, in line design. |
Ease of set up, training and
operation. |
| Stainless steel exterior finish. |
Clean and durable finish, preferred
in food and other industries. |
|
 |
|
| Case range: |
Superformer 1M
8.00” x 6.00” x 3.00” (LxWxH)min.
200mm x 150mm x 75mm (LxWxH)min.
18.00” x 14.00 x 16.00” (LxWxH)max.
450mm x 350mm x 400mm (LxWxH)max.
|
| |
Superformer 1
8.00” x 8.00 x 6.00” (LxWxH)min.
200mm x 200mm x 150mm (LxWxH)min.
24.00” x 20.00” x 24.00” (LxWxH)max.
600mm x 500mm x 600mm (LxWxH)max. |
| |
Superformer 1L
12.00” x 8.00” x 6.00” (LxWxH)min.
200mm x 200mm x150mm (LxWxH)min.
31.50” x 20.00” x 28.00” (LxWxH)max.
800mm x 500mm x 700mm (LxWxH)max. |
| Speed: |
Superformer 1M
Up to 15 cases per minute. |
| |
Superformer 1
Up to 13 cases per minute. |
| |
Superformer 1L
Up to 9 cases per minute. |
| Taping heads: |
OK 55 high quality taping head with open tape feed path, suitable for 2” wide tape (max.) and 14” diameter rolls. |
| Case magazine: |
Horizontal, belt driven, indexing magazine, length 40”, 1000mm. |
| Electric: |
400V, 3 Phase, 50Hz standard. Other voltages to
requirement. 480V, 3 Phase, 60Hz. |
| Pneumatic: |
80-100 psi(6 - 8 bar), 1/2” supply. |
| Controls: |
PLC controls with operator fault finding display.
Signals for low tape, no tape, tape not applied, low
case magazine, and empty case magazine. |
| Finish: |
Stainless steel frame and exterior, plated and painted interior. |
| Machine Handling: |
Right to left or left to right to requirement.
|
|
|
 |
|
 |
Smaller case sizes
All stainless steel
Case magazine 60”(150mm) long
OK 75 taping head for 3” wide tape
Superformer SF2 High Speed Case
Erectors
Superformer SFHM Hot-Melt Case
Erectors
|
|
|